Fiat Diagnostic Cables Leads for MultiECUScan

Description

You are looking at adapter cables specifically designed for use with the MultiECUScan (formally FiatEcuScan) software package, to offer additional system coverage (Airbag, ABS, Power Steering, Slow-CAN, electric hood etc etc.). These cables offer a cost effective solution and you won’t have to modify your existing interface.

What is included in the package?

• ‘Green’ adaptor lead (MultiECUScan ‘Adapter 1’) – for ABS and Power Steering diagnostics.
• ‘Red’ adaptor lead (MultiECUScan ‘Adapter 2’) for Airbag diagnostics.
• ‘Yellow’ adaptor lead (MultiECUScan ‘Adapter 3’) – to allow low speed CAN diagnostics (Fiat 500 etc). This lead has a yellow connector on one end for easy identification. This cable meets the updated MultiECUScan specification for adaptor 3, with the pin 12 connection required for Xenon headlight coverage on CAN cars **
• ‘Purple’ adaptor lead (MultiECUScan ‘Adapter 4’) for electric hood diagnostics.

Technical Details:

• Advised by MultiECUScan / FiatECUScan diagnostic software
• Compatible with ELM327 or/and KKL (VAG COM)
• 4 x 16 Pin OBD Cable Adaptors
• See MultiECUScan / FiatEcuScan website for a full list of supported vehicles

Four ODB cable adapters to allow additional diagnostic options for Italian cars. These include ENIGINE, ABS, POWER STEERING, ELECTRIC HOOD and CAN ECU’s.

Specification:

• Green Adaptor Lead (MultiECUScan / FiatEcuScan Adaptor 1) = Engine, ABS, Power Steering
• Red Adaptor Lead (MultiECUScan / FiatEcuScan Adaptor 2) = Airbag
• Yellow Adaptor Lead (MultiECUScan / FiatEcuScan Adaptor 3) = CAN
• Purple Adaptor Lead (MultiECUScan / FiatEcuScan Adaptor 4) = Electric Hood

Pin Configurations:

• Green Adaptor Lead = Female pin 7 to male pins 1,7,9,12.
• Red Adaptor Lead = Female pin 7 to male pin 3
• Yellow Adaptor Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12
• Purple Adaptor Lead = Female pin 7 to male pins 7,8,11,13